Firmware SHARKX6 V2    2016-09-05  Ver102 ZIP
Firmware V2 FOR CX20     ZIP
Firmware V2 FOR CX22     ZIP
  1. Update OSD to 2.5
  2. CX20,CX22 restored the original unlcok mode
  3. Apply to FCTools2.3
  4. FCTOOLS2.2 alread included in the firmware package
  5. Add one motor fail protection(quadcopter is not available)
  6. Optimize the waypoint function

Attention: after updating firmware you have to

  1. Recalibrate the transmitter
  2. Recalibrate compass
  3. Check all the settings
  4. All parameters will be reset
Firmware SHARKX8 V2                         2015-10-15   Ver100.10 ZIP
Firmware SHARKX6 V2      ZIP
Firmware V2 FOR CX20     ZIP
Firmware V2 FOR CX22     ZIP
Firmware V2 FOR Fly3D X6      ZIP
  1. new software algorithm
  2. Operate more smoothly under GPS mode
  3. Support way point
  4. Optimize point circular function
  5. Add speed lock function
  6. Allow user-defined mapping of switches
  7. Support mid-position transmitter
  8. Add indication of geomagnetic interference
  9. Add follow-me function
  10. Optimize low voltage alarm and landing
  11. Add low voltage return home function
  12. Support OSD update

Attention: after updating firmware from V1 to V2, you have to

  1. Recalibrate the transmitter
  2. Recalibrate IMU
  3. Recalibrate compass
  4. Check all the settings
  5. All parameters will be reset
  6. for cx20 the unlock mode will be change

SHARK X8 firmware update

  1. Use the files in the ZIP package to cover the files in the SD card
  2. Restart the FC
Firmware SHARKX6 V1 for CX20   Ver151 2015-09-10   ZIP

Optimize operation under GPS
Optimize attitude flight function

 

Firmware SHARKX6 V1 for CX20   Ver148 2015-09-10   ZIP
Firmware SHARKX6 V1   Ver148 2015-09-10   ZIP

Add IMU calibration

 

Firmware SHARKX6 V1 for CX20   Ver142 2015-09-10   ZIP
Firmware SHARKX6 V1   Ver142 2015-09-10   ZIP